Owners manual

E4-WM5-Y497A00
MOUNTING INSTRUCTION
created: 08.28.15 E4-WM5-Y497A00_0 Page 5 of 5 latest revision:
Q. Release the spring compressor while ensuring that the ends of the spring remain aligned
with the spring seat and upper mount.
R. Install the assembly on to the vehicle and tighten all fasteners to vehicle manufacturer’s
specifications. This completes the installation.
S. Check wheel alignment. If necessary, adjust to the vehicle manufacturer’s specifications.
OEM upper
mount
Figure 5
OEM spring
Bilstein nut
OEM upper
retainer washer