Owners manual

E4
E4E4
E4
-
--
-
WM5
WM5WM5
WM5
-
--
-
Y
YY
Y
458A0
458A0458A0
458A0
0
00
0
MOUNTING I
MOUNTING IMOUNTING I
MOUNTING I
N
NN
N
STRUCTION
STRUCTION STRUCTION
STRUCTION
Created on 05.12.14 E4-WM5-Y458A00_0 page 3 of 3
1. Reinstall OEM spring seat on supplied spring seat adaptor, Bilstein supplied bump stop
cap, OEM coil spring, and all OEM upper mount parts including bump stop, and upper
spring hat in their original positions. Install new flange nut (supplied) on the shock
absorber top mount pin and tighten to 25 Nm (19 lb/ft).
2. Install new Bilstein supplied flange nuts on the lower T-Bar mount and tighten to 25 Nm (19
lb/ft). Do not re-use original lock nuts.
3. Check and adjust vehicle front-end alignment after installation.
supplied
flange nut
supplied spring seat
adaptor
OEM spring seat
supplied bump stop
cap
supplied
flange nuts
circlip