VQ Owner’s Manual BILLY GOAT VQ VACUUM Owner's Manual VQ902SPH, VQ1002SP Accessories VACUUM HOSE KIT HOSE COUPLER KIT Optional Debris bags RIDE ON CHARIOT KIT STANDARD DEBRIS BAG DEBRIS BAG COVER TURF DEBRIS BAG 5" (127mm) x 8' (2.4m) For vacuuming in hard-to-reach areas 5" (127mm) For coupling multiple hoses together to increase vacuuming distance. Reduces operator fatigue. Operator stands while riding behind vacuum. Maximum load 300 lbs.(136 kg) Standard on VQ models. For dusty conditions.
VQ Owner’s Manual ABOUT THIS MANUAL THANK YOU for purchasing a BILLY GOAT ® VQ Vacuum. Your new machine has been carefully designed and manufactured to provide years of reliable and productive service. This manual provides complete operating and maintenance instructions that will help to maintain your machine in top running order. Read this manual carefully before assembling, operating, or servicing your equipment.
VQ Owner’s Manual SERIAL PLATE DATA Record the model number, serial number, date of purchase, and where purchased. Purchase Date: Purchased From: Specifications VQ1002SP Engine: HP 10 (7.45 kW) 9.0 (6.6 kW) Engine: Type 205432-0141 GX270K1QA2 4 qt. (3.8 L) 6.3 qt. (6.0 L) Engine: Oil Capacity 0.875 qt. (0.8 L) 1.16 qt. (1.1 L) Total Unit Weight: 282# (127.9 kg) 287.3# (130.3 kg) Overall Length 66” (1.68m) 66” (1.68m) Overall Width 32.75” (0.83m) 32.75” (0.83m) Overall Height 43.5” (1.
VQ Owner’s Manual GENERAL SAFETY INSTRUCTIONS and SYMBOLS The safety symbols shown below are used throughout this manual. You should become familiar with them before assembling, operating, or servicing this equipment. This symbol indicates important information that will prevent injury to yourself or others. This symbol indicates ear protection is recommended when operating this equipment. This symbol indicates eye protection is recommended when operating this equipment.
VQ Owner’s Manual DO NOT run this equipment indoors or in any poorly ventilated area. Refueling outdoors is recommended. DO NOT refuel this equipment while the engine is running. Allow engine to cool for at least two minutes before refueling. DO NOT store gasoline near an open flame. DO NOT remove gas cap while engine is running. DO NOT start or operate engine if strong odor of gasoline is present. DO NOT start or operate engine if gasoline is spilled.
VQ Owner’s Manual SOUND SOUND LEVEL 88 dB(a) at Operator Position Sound tests were conducted in accordance with 2000/14/EEC, and were performed on 2-14-2002 under the conditions listed below. Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on the unit for the sound power level for your model. General Conditions: Temperature: Wind Speed: Wind Direction: Humidity: Barometric Pressure: Sunny 50oF (10oC) 15 mph (24.1 kmh) North 32% 30.
VQ Owner’s Manual INSTRUCTION LABELS ® The labels shown below were installed on your BILLY GOAT VQ Vacuum. If any labels are damaged or missing, replace them before operating this equipment. Item numbers from the Illustrated Parts List and part numbers are provided for convenience in ordering replacement labels. The correct position for each label may be determined by referring to the Figure and Item numbers shown.
VQ Owner’s Manual PACKING CHECKLIST Your Billy Goat is shipped from the factory in one carton, completely assembled except for the debris bag, deflector assy, upper handle assembly, rod nozzle door, and elbow assy. READ all safety instructions before assembling unit.
VQ Owner’s Manual ASSEMBLY 1. UPPER HANDLE (item 41). Assemble securely to lower handle stubs (item 37) and handle brace (item 36), using screws (item 120 & 121), so that screw heads are on inside of handle. Otherwise, premature bag wear could result. 2. NOZZLE DOOR CONTROLS. Assemble ball joints (item 73), jam nuts (item 138), to both ends of rod (item 47). Do not fully tighten jam nuts.
VQ Owner’s Manual OPERATION Like all mechanical tools, reasonable care must be used when operating machine. Inspect machine work area and machine before operating. Make sure that all operators of this equipment are trained in general machine use and safety. PUT OIL IN ENGINE BEFORE STARTING STARTING ENGINE: See engine manufacturer’s instructions for type and amount of oil and gasoline used. Engine must be level when checking and filling oil and gasoline.
VQ Owner’s Manual DEBRIS BAG Debris bags are normal replaceable wear items. Note: Frequently empty debris to prevent bag overloading with more weight than you can lift. An optional bag and dust cover is available for use where debris will be vacuumed in dusty conditions (See Optional Accessories shown on page 1.) DO NOT place bag on or near hot surface, such as engine. Run engine at 1/2 throttle for first 1/2 hour to condition new bag.
VQ Owner’s Manual MAINTENANCE PERIODIC MAINTENANCE Periodic maintenance should be performed at the following intervals: Maintenance Operation Every Use (daily) Every 5 hrs (daily) Every 10 Hrs Every 25 Hrs Every 50 Hrs z Inspect for loose, worn or damaged parts. Clean Debris bag and check strap tightness z Check Tire pressure z z Engine (See Engine Manual) z Check for excessive vibration Check belt adjustment (pg.
VQ Owner’s Manual DRIVE Chains and Belts are normal replaceable wear items. A new chain should not be used on worn sprockets. Sprockets should be replaced when replacing chains. MAINTENANCE Brake Adjustment: As parking brake wears, the brake discs may eventually require adjustment. To adjust belt, remove brake guard and tighten mounting nut that connects brake arm onto transmission. Adjust cable as required. Unit must freewheel with brake off. DO NOT OVER ADJUST. CHAIN ADJUSTMENTS (see pg. 17) 1.
VQ Owner’s Manual Troubleshooting P ro b le m A b n o rm a l vib ra tio n . W ill n o t v a c u u m o r h a s p o o r v a c u u m p e rfo rm a n c e E n g in e w ill n o t s ta rt. P o s s ib le C a u s e · L o o s e o r o u t o f b a la n c e im p e lle r o r lo o s e e n g in e · d irty d e b ris b a g . N o zzle h e ig h t s e t to o h ig h o r lo w . H o s e k it c a p m is s in g . C lo g g e d n o zzle o r e x h a u s t. E x c e s s ive q u a n tity o f d e b ris . · S to p s w itc h o ff.
VQ Owner’s Manual MAINTENANCE RECORD Date Part No 830542 Service Performed 15 Form No F062007A
VQ Owner’s Manual PARTS DRAWING VQ Part No 830542 16 Form No F062007A
VQ Owner’s Manual A A Part No 830542 17 Form No F062007A
VQ Owner’s Manual PARTS LIST IT EM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 D ESC R IPT IO N EN G IN E 10 H P IN T EK B&S EN G IN E 9 H P H O N D A AN G LE M O U N T H D LE W A IM PELLER ASSY VQ (IN C LU D ES IT EM 4,5,6,7) KEY 0.25 SQ . X 2.75" W ASH ER LO C K 7/16 T W IST ED T O O T H SC R EW C AP 7/16 N F x 2 1/4 G R 8 T O R Q 60 FT LBS (81.4 N .
VQ Owner’s Manual 1 1 2 4 1 2 2 2 1 1 1 2 2 1 1 1 1 - VQ 902SPH PART NO .
VQ Owner’s Manual VQ1002SP PART NO. *8149002 *8172007 8172008 *8172009 QTY 4 1 3 1 VQ902SPH PART NO. *8149002 *8172007 8172008 *8172009 QTY 4 1 3 1 W ASHER FLAT CUT 1/4 W ASHER FLAT CUT 5/16 *8171002 *8171003 33 25 *8171002 *8171003 33 25 W ASHER 3/4 (0.765 x 1.25 x 0.06) BOLT SHOULDER 3/8 X 3/4" W ASHER LOCK 1/4 W ASHER LOCK 5/16 LABEL SPEED CONTROL SCREW MACH #10-24 x 2" SCREW SHT.
