User`s manual

BIPAC-74x Series Router – 741 GE, 741 GE V2.0 and 743 GE

Chapter 3: Basic Installation and Configuration

Factory Default Settings

Before configuring your, you need to know the following default settings.

Web Interface:

Username: admin

Password : admin

LAN Device IP Settings:

IP Address: 192.168.1.254

Subnet Mask: 255.255.255.0

ISP setting in WAN site :

PPPoE

DHCP server :

DHCP server is enabled.

Start IP Address : 192.168.1.100

IP pool counts : 100

Username and Password

The default username and password are “admin” and “admin” respectively.

If you ever forget the password to log in, you may

ress the RESET button

to restore the factory default settings

Attention

LAN and WAN Port Addresses

The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown

below.

LAN Port WAN Port

IP address

192.168.1.254

Subnet Mask

255.255.255.0

DHCP server function

Enabled

IP addresses for

distribution to PCs

100 IP addresses continuing from

192.168.1.100 through 192.168.1.199

The PPPoE function is enabled

to automatically get the WAN

port configuration from the ISP,

but you have to set the

username and password first.