User`s manual

VoIP/(802.11g) ADSL2+ (VPN) Firewall Router
Chapter 4: Configuration
48
PPPoE with Pass-through Connections
PPPoE with pass-through adapts the following method: PPPoE Routed mode + 1483 Bridge Mode. With
pure PPPoE connection, the router can get one WAN address to the router. With the PPPoE and PPPoE
pass-through, concurrently, it allows user to have a WAN address assigned to the router but also able to
get another WAN IP from ISP using PPPoE dialer (e.g WinPoETor Windows XP PPPoE Dialer) at the
same time.
Description: User-definable name for this connection.
VPI/VCI: Enter the information provided by your ISP.
ATM Class: The Quality of Service for ATM layer.
NAT: The NAT (Network Address Translation) feature allows multiple users to access the Internet through
a single ISP account, sharing a single IP address. If users on your LAN have public IP addresses and can
access the Internet directly, the NAT function can be disabled.
Username:
Enter the username provided by your ISP. You can input up to
128
alphanumeric characters
(case sensitive). This will usually be in the format of “username@ispname” instead of simply “username”.
Password: Enter the password provided by your ISP. You can input up to 128 alphanumeric characters
(case sensitive).
Service Name: This item is for identification purposes. If it is required, your ISP will provide you the
information. Maximum input is 20 alphanumeric characters.
IP Address: Specify if the Router can get an IP address from the Internet Server Provider (ISP)
automatically or not.
Click Obtain an IP address automatically via DHCP client to enable the DHCP client function.
Click Specify an IP address to disable the DHCP client function, and specify the IP address manually.
The setting of this item is specified by your ISP..
Authentication Protocol: Default is Chap (Auto). Your ISP will advise you whether to use Chap or Pap.