User`s manual

VoIP/(802.11g) ADSL2+ (VPN) Firewall Router
Chapter 4: Configuration
37
Wireless Client / MAC Address Filter (Wireless Router only)
The MAC Address filter supports up to 16 wireless network machines and helps you to manage your
network control to accept traffic from specific authorized machines or to restrict unwanted machine(s)
accessing your LAN.
There are no pre-define MAC Address filter rules; you can add the filter rules to meet your requirements.
Wireless Client Filter:
Default setting is set to
Disable
.



Allowed:
To allow specific devices to access your LAN, insert the MAC Address in the space
provided or click . Make sure your PC’s MAC Address is listed.


 Blocked: To prevent specific unwanted devices accessing the LAN, insert the MAC Address in
the space provided or click . Make sure your PC’s MAC Address is not listed.
The maximum number of clients is 16. The MAC addresses are six bytes long; they are presented only in
hexadecimal characters. The numbers 0 - 9 and letters a - f are acceptable.
Note:
Follow the MAC Address Format xx:xx:xx:xx:xx:xx. Colon ( : ) must be included.
Candidates: Automatically detects devices connected to the router through the Wireless.
→Associated Wireless Clients
Associate Wireless Client displays a list of individual wireless device MAC Address that are currently
connected to the router. Select the required device to be blocked or allowed by checking the box next to
the MAC Address. Then click Add to insert to the Wireless Client (MAC Address) Filter table. The
maximum number of Wireless clients filter entries is 16.