User`s manual

VoIP/(802.11g) ADSL2+ (VPN) Firewall Router
Chapter 4: Configuration
149
Spaces next to VPI and VCI, enter 0 and 33 respectively. Select appropriate ATM Class, Encapsulation
Method, Acceptable Frame Type, Filter Type and PVID for Untagged Frames.
VPI and VCI: Enter the information provided by your ISP.
ATM Class: The Quality of Service for ATM layer.
Encapsulation method: Select the encapsulation format, this is provided by your ISP.
Acceptable Frame Type: Specify what type of traffic can pass through this connection, all traffic or only
VLAN tagged.
Filter Type: Specify the type of ethernet filtering performed by the named bridge interface.
All
Allows all types of ethernet packets through the port.
Ip Allows only IP/ARP types of ethernet packets through the port.
Pppoe Allows only PPPoE types of ethernet packets through the port.
PVID for Untagged Frames:
PVID stands for Port VLAN Identifier. When an untagged packet is
received by input port(s), this packet will be tagged with the specified PVID.
From the example, VPI and VCI is the only section that needs to be modified.
Repeat the same procedure by clicking Create  select RFC1483 Bridged  fill-in the rest of PVC 0/34
to 0/39.