User`s manual

VoIP/(802.11g) ADSL2+ (VPN) Firewall Router
Chapter 4: Configuration
141
Advanced
Configuration options within the Advanced section are for users who wish to take advantage of the more
advanced features of the router. Users who do not understand the features should not attempt to
reconfigure their router, unless advised to do so by support staff.
Items within the Advanced section include: Static Route, Dynamic DNS, Check Email, Device
Management, IGMP and VLAN Bridge.
Static Route
Click on Routing Table and then choose Create Route to add a routing table.
Destination: This is the destination subnet IP address.
Netmask: Subnet mask of the destination IP addresses based on the above destination subnet IP.
Gateway:
The gateway IP address to which packets are to be forwarded.
Interface:
Select the interface through which packets are to be forwarded.
Cost: Route cost (aka Hop). This should usually be left at 1.