User`s manual

VoIP/(802.11g) ADSL2+ (VPN) Firewall Router
Appendix A: Product Support and Contact Information
119
Main Digit Sequence
This field specifies the main number pattern to be matched after the Prefix operations.
Characters which may be used are:
x: Any numeric number between 0 and 9.
. ( period ): Repeat numeric number(s) between 0 and 9.
* (asterisk sign): The character ‘*’ on phone key pad. Please check if it is supported by your VoIP
Service Provider or Local Telephone Service Provider for special service(s).
# (pound sign): The character ‘#’ on phone key pad. Please check if it is supported by your VoIP Service
Provider or Local Telephone Service Provider for special service(s).
Provider field specifies how the dialed number is to be routed to place the call. The list will include User
defined Profiles as set up in the VoIP Wizard section.
<@ Current Profile>: Refers to the VoIP account registered on the Phone Port.
<@ PSTN>: The call will be routed via the PSTN line.
<@ENUM>: Used to make a VoIP SIP direct call via E.164 number (“ENUM”) to an ENUM callee.
Electronic Number (ENUM) uses DNS (Domain Network System) technology to map between a
traditional phone number (PSTN) to an Internet address / SIP URL. The ENUM number must be
registered via a public ENUM site or your VoIP Service Provider.
<@ SIPgateway>: Used for the Intelligent Call Routing feature. The call will be routed via the
selected VSP as specified in the VoIP User-Defined Profiles link on the VoIP Wizard page. Go to the
VoIP Wizard in this manual for more information.
Dial-Plan Examples: Description
x.
Any number of digits up to a maximum of16.
Note the period required. Dialled after timeout.
xxx
Any three digit number.
Note: No period is needed (.) Dialled after third digit.
xxxx.
Any number with variable length, but no shorter than
four digits.
Maximum length is 16.
Note the period required. Dialled after timeout.
123x.
Any number starting with the digit sequence 123.
Maximum length is 16.
Note the period required. Dialled after timeout.
[x…x]x.
For example: [124]x.
Any number (0-9) starting with 1 or 2 or 4.
Maximum length is 16.
Note the period required. Dialled after timeout.
[x-x]x.
For example: [1-3]x.
Any number starting with a digit in the range 1 - 3.
Maximum length is 16.
Note the period required. Dialled after timeout.
x[x-x]x.
For example: 9[4-6]8x.
Any number starting with 9, the second number
between 4-6, and third number 8.
Maximum length is 16.
Note the period required. Dialled after timeout.