User manual

69
automatically between wireless client and Access Point (AP). Default value is 3600
seconds.
If you want to enable the RADIUS service, check Enable and then do the following settings.
RADIUS Server IP Address: Enter the IP address of RADIUS authentication server.
RADIUS Server Port: Enter the port number of RADIUS authentication server here.
Default value is 1812.
RADIUS Shared Secret: Enter the password of RADIUS authentication server.
Click Apply to confirm the settings.
WPA / WPA2 - PSK
Security Mode: You can choose the type of security mode you want to apply from the
drop-down menu.
WPA Algorithms: There are two Algorithms, AES (Advanced Encryption Standard) and
TKIP(Temporal Key Integrity Protocol) which help to protect the wireless communication.