User manual

57
EWAN ( BiPAC 7300N RE only)
Click on Continue to choose the Protocol to connect with EWAN or click Jump to Wireless
Setting to use Protocol: Obtain an IP Address Automatically to connect and setup wireless
settings at the same time.
Obtain an IP Address Automatically
When connecting to the ISP, BiPAC 7300N RE also functions as a DHCP client. BiPAC
7300N RE can automatically obtain an IP address, subnet mask, gateway address, and
DNS server addresses if the ISP assigns this information via DHCP.
Protocol: The current ATM protocol in the device
Click on the Continue button and wait for your connection to be connected.