BiPAC 7300M 802.
Billion BiPAC 7300M 802.11g MIMO ADSL2+ Router For more detailed instructions on configuring and using the 802.11g MIMO ADSL2+ Router, please refer to the on-line manual. Package Contents BiPAC 7300M 802.11g MIMO ADSL2+ Router CD-ROM containing the on-line manual RJ-11 ADSL/telephone Cable Ethernet (CAT-5 LAN) Cable AC-DC power adapter (12VDC, 1A) This Quick Start Guide Do not use the router in high humidity or high temperatures. Do not use the same power source for the router as other equipment.
Quick Start Guide The Front LEDs BiPAC 7300M LED 2 Meaning 1 PPP : Lit steady when there is a PPPoA / PPPoE connection. 2 ADSL: Lit when successfully connected to an ADSL DSLAM (“linesync”). 3 LAN Port: Lit when connected to an Ethernet device. Green for 100Mbps; Orange for 10Mbps. Blinking when data is Transmitted / Received. 4 WLAN : Lit green when the wireless connection is established. Flashes when sending/receiving data. 5 SYS : Lit when the system is ready.
Billion BiPAC 7300M 802.11g MIMO ADSL2+ Router The Rear Ports BiPAC 7300M 4 3 1 2 Port 1 2 3 4 DC 12V/1A Meaning Connect the supplied power adapter to this jack. 1.After the device is powered on, press it to perform Failure recover for a dead routers: Simply hold the Emergency/Failure Recovery Button” when power on the routers and download the Application if necessary. RESET 2.
Quick Start Guide Connecting BiPAC 7300M 1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network. 2. Power on the device. 3. Make sure the PWR, SYS, and WLAN LEDs are lit steadily and that the relevant LAN LED is lit.
Billion BiPAC 7300M 802.11g MIMO ADSL2+ Router Configuring PC in Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window, click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration.
Quick Start Guide Configuring PC in Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration.
Billion BiPAC 7300M 802.11g MIMO ADSL2+ Router Configuring PC in Windows 98/Me 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP/IP -> NE2000 Compatible, or the name of your Network Interface Card (NIC) in your PC. 3. Select the Obtain an IP address automatically radio button. 4. Then select the DNS Configuration tab. 5. Select the Disable DNS radio button and click OK to finish the configuration.
Quick Start Guide Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties. 3. Select the Obtain an IP address from a DHCP server radio button and click OK.
Billion BiPAC 7300M 802.11g MIMO ADSL2+ Router Configuring Your 802.11g MIMO ADSL2+ Router 1. To configure this device, you must have IE 5.0 / Netscape 4.5 or above installed 2. You may configure the router for Internet access in two ways: Easy Sign On (EZSO) Web Configuration Easy Sign On: User just installs all of cables and uses the browser to surf Internet. At this time, the EZSO WEB GUI will be popped up and request you to input some basic information you get from ISP.
Quick Start Guide DHCP 1. Please wait when the connection is trying. Web Configuration: 1. Open the web browser and type http://192.168.1.254 in the browser’s address box. This number is the default IP address for this router. Press Enter. 2. A username and password window will appear. The default username and password are admin and admin. Press OK to proceed. 3. You will get a status report on web page. 10 2. Login Successfully.
Billion BiPAC 7300M 802.11g MIMO ADSL2+ Router Verifying Your Local Network Connection with the Device To see if this ADSL Router is visible on the local network, go to Start / Run. In the Run dialog box, type “ping 192.168.1.254” then press OK. A command prompt window will pop out. If your ping is successful which means your local network is able to reach to the device, then the command prompt window will close up automatically.
