User manual

58
seconds.
If you want to enable the RADIUS service, check Enable and then do the following settings.
RADIUS Server IP Address: Enter the IP address of RADIUS authentication server.
RADIUS Server Port: Enter the port number of RADIUS authentication server here.
Default value is 1812.
RADIUS Shared Secret: Enter the password of RADIUS authentication server.
Click Apply to confirm the settings.
WPA / WPA2 - PSK
Security Mode: You can choose the type of security mode you want to apply from the
drop-down menu.
WPA Algorithms: There are two Algorithms, AES (Advanced Encryption Standard) and
TKIP(Temporal Key Integrity Protocol) which help to protect the wireless communication.
The Default algorithm is AES.