User`s manual

Quick Start Guide
2
Hardware Overview
The Front LEDs
The Rear Ports
Connect the
supplied power
adapter to this jack
Connect the supplied
RJ-11 cable to this
port when connecting
to the ADSL/telephone
network
Press it to reset
the device or
restore to factory
default settings
Power
ON/OFF
switch
Connect your
computer to a LAN
port, using the
included Ethernet
cable
Lights Green when
the power and
router system are
ready.
Lights when 3G
s
e
rvi
ce
i
s
r
eady
.
Lit when connected
to an Ethernet
device
Lit green when the
wireless connection
is established
Lit steady when there
is a PPPoA / PPPoE
connection
Lit when successfully
connected to an ADSL
DSLAM
connection.
Connect the
detachable antenna
Connect the 3G
card bus data
card to this slot
Push WPS button
to trigger Wi-Fi
Protected Setup