BiPAC 7300GX 3G/ADSL2+ Wireless Router Quick Start Guide
Billion BiPAC 7300GX 3G/ADSL2+ Wireless Router PLEASE READ THE QUICK START GUIDE AND FOLLOW THE STEPS CAREFULLY. THIS QUICK START GUIDE WILL HELP YOU INSTALL THE DEVICE PROPERLY AND AVOID IMPROPER USAGE. IF YOU NEED MORE INFORMATION ON THIS SOFTWARE CONFIGURATION, PLEASE REFER TO THE USER’S MANUAL ON THE CD-ROM.
Quick Start Guide Hardware Overview The Front LEDs Lights Green when the power and router system are ready. Lit green when the wireless connection is established Lights when 3G service is ready. Lit when successfully connected to an ADSL DSLAM connection.
Billion BiPAC 7300GX 3G/ADSL2+ Wireless Router Hardware Connection Hardware Installation 1. Power Connection Plug the supplied power adapter to the wall jack and the other side to the router. Please note that the plug type may differ according to different countries. 2. LAN Connection Connect the supplied RJ-45 Ethernet cable to one of the Ethernet ports, and the other side to the PC’s Ethernet interface.
Quick Start Guide 3. ADSL Connection Connect the supplied RJ-11 phone cable to the router’s ADSL port, and the other side to the phone jack on the wall. 4. Splitter/ Micro-filter Connection Splitter / Micro-filter are important for ADSL installation. High-frequency signals are directed to the ADSL modem, and low-frequency signals are directed to the telephone or other analog voice-channel device to prevent inter-modulation distortion and also to get good speed and stable ADSL sync rate.
Billion BiPAC 7300GX 3G/ADSL2+ Wireless Router Easy Sign-On: User just installs all of cables and uses the browser to surf Internet. At this time, the Easy Sign-On WEB GUI will be popped up and request you to input some basic information. After this, you can surf Internet right away. Troubleshooting 1. None of the LEDs are on when you turn on the router. Check the connection between the adapter and the router. If the error persists, you may have a hardware problem.
Quick Start Guide Extreme caution should be exercised when using the car charger adapter! Only use power chargers that have been approved by Billion to be used with the device. The supplied power charger adapter can only be used with a 12V car lighter socket. Please make sure you do not use a 24V car lighter socket. If your car uses a 24V car lighter socket, please make sure you use a voltage regulator to change the voltage from 24V to 12V.
