User`s manual

Chapter 3 Installation and Configuration

3.4.3.1 WAN

Pvc0 is set as default and then press submit.

The screens below contain settings for the WAN interface toward Internet.

Per VC Settings

There are eight Virtual Circuits (VC) for you to set, from VC 0 to VC 7. Before you make the settings,

please scroll down to the button of the page and select the item of Virtual Circuit you want to configure.

Enabled? : Select Yes if you want to enable the settings of this VC or select No if you want to disable the

settings of this VC.

VPI: Consult the telephone company to get the Virtual Path Identifier (VPI) number. The default value is 0.

VCI: Consult the telephone company to get the Virtual Channel Identifier (VCI) number. The default value

is 32.

Static IP Address: Enter the information provided by your ISP.