User manual

Chapter 2 Using the Broadband Router
5
2.3 The Rear Ports
Port Meaning
PWR
Connect the supplied power adapter to this jack.
RESET
After the device is powered on, press it to reset the device or restore to
factory default settings.
0-3 seconds: reset the device
6 seconds above: restore to factory default settings (this is used when
you can not login to the router, e.g. forgot the password)
WAN
Connect an UTP Ethernet cable to this port when connecting to a hub.
Connect a crossover cable to this port when connecting to a DSL/Cable
bridge or modem for establishing WAN connections.
LAN
(1x-4x)
Connect an UTP Ethernet cable to these four ports when connecting to
a LAN of 10Mbps or 100Mbps such as an office or home network.