User manual

Chapter 4 Troubleshooting

WINIPCFG.EXE

For Win95, 98, ME, the WINIPCFG program is used to gather information about the TCP/IP

connections that are active on your system. It cannot be used to dynamically adjust TCP/IP

connections. You can also renew leases (if allowed by the network), and get the current IP

address assignments through this program.

1. From Windows, go to Start  Run, enter WINIPCFG, and click “OK”.

2. The following figure displays the adapter address and current TCP/IP address. Select the

correct Ethernet adapter that is installed in this computer at the “Ethernet Adapter

Information”.

Select the

correct Ethernet

adapter.

3. Click the “More Info >>” button to get detailed configuration information.