User manual

Billion BIPAC 6600 Broadband Firewall Router
The Rear Ports
3
4
2
3
1
Port Meaning
1
PWR
Connect the supplied power adapter to this jack.
2 RESET
Press it to restore the factory default setting back.
3
WAN
(RJ-45
connector)
Connect an UTP Ethernet cable to this port when connecting to a
hub.
Connect a crossover cable to this port when connecting to a
DSL/Cable bridge or modem for establishing WAN connections.
4
LAN
(RJ-45
connector)
Connect the supplied crossover cable to the relevant LAN port
when connecting to a NIC (Network Interface card) in PC.
Connect an UTP Ethernet cable to this port when connecting to a
LAN such as a home network.
Connecting Your Broadband Router
1. Connect the Router to a LAN (Local Area Network) and the WAN network.
2. Power on the device.
3. Make sure the PWR, SYS, WAN LEDs are lit steadily and the relevant LAN LED is lit.