User manual

Chapter 3 Configuration
27
Automatically adjust clock for daylight saving changes: It is optional for different time zone
area.
SNTP Server IP Address: Specify the IP address if you want to use your familiar SNTP server.
3.4.3.3.3 Upgrade
To upgrade the firmware of BIPAC 6500, you should download or copy the firmware to your
local environment first. Press the “Browse…” button to specify the path of the firmware file.
Then, click “Upgrade” to start upgrading. When the procedure is completed, BIPAC 6500 will
reset automatically to make the new firmware work.
3.4.3.3.4 Factory Setting
If for any reason, you have to reset this router back to factory default settings, be careful that
the current settings will be lost and the settings are reset back to its default value. The factory
default values is detailed in the section 3.2 ‘‘Factory Default Settings’’.