User manual

2.4 The Rear Ports
BiPAC 5200W
Port Meaning
1
Antenna
Connect the antenna to this port.
2
Power
Switch
Power on/off switch.
3 Power
Connect the supplied power adapter to this jack.
4
Reset
After the device is powered on, press it to reset the device or
restore to factory default settings.
0-3 seconds: reset the device
6 seconds above: restore to factory default settings (this is used
when you can not login to the router, e.g. forgot the password).
5
Ethernet
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
four LAN ports when connecting to a PC or an office/home
network of 10Mbps or 100Mbps.
6
DSL
(LINE)
Connect the supplied RJ-11 (“telephone”) cable to this port when
connecting to the ADSL/telephone network.
11