User manual

Interface: Select which channel (PVC) to configure.

Direction: Select the access to the Internet (“Outgoing”) or from the Internet

(“Incoming”) or Both.

IP/MAC Filter Rule Editing

IP/MAC Filter Rule Index: This is item number

Rule Type: Choose “IP” or “MAC” rules

Active: Select Yes from the drop down list box to enable IP filter rule.

Source IP Address: The source IP address or range of packets to be monitored.

Subnet Mask: It is the source IP addresses based on above source subnet IP

Source Port Number: This Port or Port Ranges defines the port allowed to be used by

the Remote/WAN to connect to the application. Default is set from range 0 ~ 65535. It is

recommended that only advanced user configure this option.

Destination IP Address: This is the destination subnet IP address.

Subnet Mask: It is the destination IP addresses based on above destination subnet IP

Destination Port Number: This is the Port or Port Ranges that defines the application.

Protocol: It is the packet protocol type used by the application. Select either TCP or UDP

or ICMP

Rule Unmatched: Select action for the traffic that does not match the current rule;

Forward to leave it pass through, and NEXT to check it by the next rule.

IP/MAC Filter Listing

#: Item number.

Active: Whether the connection is currently active.

Src IP/Mask: The source IP address or range of packets to be monitored.

Dest IP/Mask: This is the destination subnet IP address.

Src port: This Port or Port Ranges defines the port allow to be used by the Remote/WAN

to connect to the application. Default is set from range 0 ~ 65535. It is recommended that an

advanced user configure this option.

Dest Port: This is the Port or Port Ranges that defines the application.

Protocol: It is the packet protocol type used by the applications Select either TCP or UDP

or ICMP

Unmatched: It shows this profile’s setting: Forward or NEXT