User manual

3.4 LAN and WAN Port Addresses

The parameters of LAN and WAN ports are preset in the factory. The default values are

shown below.

LAN Port WAN Port

192.168.1.254

IP address

Subnet Mask

255.255.255.0

DHCP server function

Enabled

The PPPoE function is

enabled to automatically

get the WAN port

configuration from the

ISP.

100 IP addresses continuing from

192.168.1.100 through

192.168.1.199

IP addresses for

distribution to PCs

3.5 Information from your ISP

Before configuring this device, you have to check with your ISP (Internet Service Provider)

what kind of service is provided such as PPPoE, PPPoA, RFC1483, or IPoA.

Gather the information as illustrated in the following table and keep it for reference.

VPI/VCI, VC-based/LLC-based multiplexing, Username,

Password, Service Name, and Domain Name System (DNS)

IP address (it can be automatically assigned by your ISP when

you connect or be set manually).

PPPoE

VPI/VCI, VC-based/LLC-based multiplexing, Username,

Password, and Domain Name System (DNS) IP address (it

can be automatically assigned by your ISP when you connect

or be set manually).

PPPoA

VPI/VCI, VC-based/LLC-based multiplexing to use Bridged

Mode.

RFC1483 Bridged

RFC1483 Routed

VPI/VCI, VC-based/LLC-based multiplexing, IP address,

Subnet mask, Gateway address, and Domain Name System

(DNS) IP address (it is fixed IP address).