User manual

Rear Panel
Port Meaning
DSL
Connect the supplied RJ-11 (“telephone”) cable to this port
when connecting to the ADSL/telephone network.
1
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to the
Ethernet port when connecting to a PC or an office/home
network of 10Mbps or 100Mbps.
2 Ethernet
After the device is powered on, press it to reset the device or
restore to factory default settings.
1-3 seconds: reset the device
Reset
3
6 seconds above: restore to factory default settings (this is
used when you cannot login to the router, e.g. forgot the
password)
Power
4
Connect the supplied power adapter to this jack.
Power Switch
(Only for 5200S
RD)
5
Power ON/OFF switch.
12