User manual

Rear Panel
Port Meaning
1 DSL
Connect the supplied RJ-11 (“telephone”) cable to this port when
connecting to the ADSL/telephone network.
2 USB
Connect the USB cable to this port.
Connect to a UTP Ethernet cable (Cat-5 or Cat-5e) to the
Ethernet port when connecting to a PC or an office/home network
of 10Mbps or 100Mbps.
3 Ethernet
After the device is powered on, press it to reset the device or
restore to factory default settings.
4 Reset
1-3 seconds: reset the device
6 seconds above: restore to factory default settings (this is used
when you cannot login to the router, e.g. forgot the password)
5 Power
Connect the supplied power adapter to this jack.
6
Power
Switch
Power ON/OFF switch.
10