User manual

add header for this packet even the detail setting condition has adding 802.1p priority ability.
Rule Index: Select 16 different rules, each rule’s detail can be set and saved.
Active: Select QoS is activated or deactivated.
Application: Select 11 different applications: IGMP, SIP, H.323, MGCP, SNMP, DNS,
DHCP, RIP, RSTP, RTCP, RTP.
Physical Ports: this function is to allow you to decide which physical port you want to
configure ,before you begin to config, please make sure QoS is activated.
Destination MAC: Set the Ethernet MAC value that you want to filter in destination side.
Destination IP: Set the IP address value that you want to filter in destination side.
Destination Mask: Set the subnet mask value that you want to filter in destination side.
Destination Port Range: Set the port range value that you want to filter in destination
side.
Source MAC: Set the Ethernet MAC value that you want to filter in source side.
Source IP: Set the IP address value that you want to filter in source side.
Source Mask: Set the subnet mask value that you want to filter in source side.
Source Port Range: Set the port range value that you want to filter in source side.
Protocol ID: Set the protocol ID type that you want to filter.
Vlan ID Range: Set the Vlan value that you want to filter.
IPP/DS Field: Select IP QoS format.
63