User manual

CPU Load: This field specifies the percentage of CPU utilization.
WAN Port Statistics: This is the WAN port.
Link Status: This is the status of your WAN link.
Transfer Rate: This is the transfer rate in kbps.
Upstream Speed: This is the upstream speed of the router
Downstream Speed: This is the downstream speed of the router
Node-Link: This field displays the remote node index number and link type. Link
types are PPPoA, ENET, RFC 1483 and PPPoE.
LAN Port Statistics: This is the LAN port
Interface: This field displays the type of port
Status: For the WAN port, this displays the port speed and duplex setting if you're
using Ethernet encapsulation and down (line is down), idle (line (ppp) idle), dial
(starting to trigger a call) and drop (dropping a call) if you're using PPPoE
encapsulation.For a LAN port, this shows the port speed and duplex setting.
TxPkts: This field displays the number of packets transmitted on this port.
RxPkts: This field displays the number of packets received on this port.
Errors: This field displays the number of error packets on this port.
Tx B/s: This field displays the number of bytes transmitted in the last second.
Rx B/s: This field displays the number of bytes received in the last second.
Up Time: This field displays the elapsed time this port has been up.
Collisions: This is the number of collisions on this port.
Poll Interval(s): Type the time interval for the browser to refresh system statistics.
Set Interval: Click this button to apply the new poll interval you entered in the Poll
Interval field above.
Stop: Click this button to halt the refreshing of the system statistics.
4.3.3 DHCP Table
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows
individual clients to obtain TCP/IP configuration at start-up from a server
Host Name: This is the name of the host computer.
43