User manual

Enable the Universal Plug and Play (UPnP) Service: Select this checkbox to

activate UPnP. Be aware that anyone could use a UPnP application to open the web

configurator's login screen without entering the BIPAC-5100/5100W's IP address

Allow users to make configuration changes through UPnP: Select this check

box to allow UPnP-enabled applications to automatically configure the

BIPAC-5100/5100W so that they can communicate through the BIPAC-5100/5100W,

for example by using NAT traversal, UPnP applications automatically reserve a NAT

forwarding port in order to communicate with another UPnP enabled device; this

eliminates the need to manually configure port forwarding for the UPnP enabled

application.

4.2.9.1 Installing UPnP in Windows Example

Follow the steps below to install the UPnP in Windows Me.

Step 1. Click Start and Control Panel. Double-click Add/Remove Programs.

Step 2. Click on the Windows Setup tab and select Communication in the Components

selection box. Click Details.

Step 3. In the Communications window, select the Universal Plug and Play check box