User manual

Active: Select Yes to enable MAC address filtering.

Action: Define the filter action for the list of MAC addresses in the MAC address

filter table. Select Deny Association to block access to the router, MAC addresses not

listed will be allowed to access the router. Select Allow Association to permit access

to the router, MAC addresses not listed will be denied access to the router.

MAC Address: Enter the MAC addresses (xx:xx:xx:xx:xx:xx)

4.2.4 WAN Setup

A WAN (Wide Area Network) is an outside connection to another network or the

Internet.

To change BIPAC-5100/5100W’s WAN remote node settings, click WAN.