User manual

4.1 Wizard Setup

4.1.1 Wizard Setup

Mode: Select Routing (default) if your ISP allows multiple computers to share an

Internet account. Otherwise select Bridge.

Encapsulation: Select the encapsulation type your ISP uses from the

Encapsulation drop-down list box. Choices vary depending on what you select in the

Mode field.

If you select Bridge in the Mode field, select RFC 1483.

If you select Routing in the Mode field, select PPPoA, RFC 1483, ENET ENCAP or

PPPoE.

Multiplex: Select the multiplexing method used by your ISP from the Multiplex

drop-down list box either VC-based or LLC-based.

Virtual Circuit ID: VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier)

define a virtual circuit.

VPI: Enter the VPI assigned to you. This field may already be configured.

VCI: Enter the VCI assigned to you. This field may already be configured.