Billion Electric Co., Ltd.
BiGuard S5 Preface Copyright Information © 2006 Billion Electric Corporation, Ltd. The contents of this publication may not be reproduced in whole or in part, transcribed, stored, translated, or transmitted in any form or any means, without the prior written consent of Billion Electric Corporation. Published by Billion Electric Corporation. All rights reserved. Version 1.
ii BiGuard S5 REMOTE PORTAL GUIDE Safety Information The BiGuard S5 is built for reliability and long service life. For your safety, be sure to read and follow these guidelines and safety warnings: • Read this installation guide thoroughly before attempting to set up the BiGuard S5. • The BiGuard S5 is a complex electronic device. DO NOT open or attempt to repair it yourself. Opening or removing the covers can expose you to high voltage and other risks.
Table of Contents Using SSL VPN Portal Access ...........................................................................................1 Installing the Network Extender ..................................................................................... 3 Installing the Transport Extender ................................................................................... 7 Accessing Network Place ............................................................................................
iv BiGuard S5 Remote Portal Guide
Remote Portal Guide The BiGuard S5 provides a secure and flexible enterprise-wide solution for data and application access anytime and anywhere. By using the BiGuard S5 SSL VPN portal services, organizations with a mobile workforce, a remote office and telecommuters gain available and reliable access to their company's network resources, centralized application control, and critical data management without the sacrifice of user-experience and performance.
2 REMOTE PORTAL GUIDE Application Definition FTP File Transfer Protocol between network locations. Click Connect to easily access the files on the FTP server. Telnet JAVA based plug-in protocol for accessing remote systems. Click Connect and follow the on-screen instructions to complete the connection. SSH JAVA based plug-in interface for the secure transfer of files. Click Connect and follow the on-screen instructions. HTTP Click Connect to connect to the HTTP server in the office.
USING SSL VPN PORTAL ACCESS Installing the Network Extender The Network Extender is a web based plug-in that simplifies clientless remote access while delivering full network connectivity for IP-based applications. The Network Extender enables combined IPSec and SSL VPN in one solution, simplifying remote access deployments while providing maximum flexibility for diverse remote access requirements.
4 REMOTE PORTAL GUIDE 5. After the screen refreshes, click Network Extender again. 6. You are required to install the XTunnel.cab. Click Install to install the software. Network Extender setup proceeds. FIGURE 1 Installation proceeding 7. You are prompted to install the SSLDrv Adapter. 8. Click Continue Anyway when prompted to accept the SSLDrv Adapter. Installation proceeds.
USING SSL VPN PORTAL ACCESS Network Extender setup proceeds. FIGURE 2 Installation proceeding After installation is complete, the Network Extender Connection Status window displays.
6 REMOTE PORTAL GUIDE • Check Uninstall On Disconnect or Browser Exit to have the system uninstall the driver every time you disconnect the Network Extender. • Click Disconnect to disconnect the Network Extender. • Click View Log to view a log of Network Extender processes. • Click Close to close the status screen. Network Extender remains active in the status bar.
USING SSL VPN PORTAL ACCESS Installing the Transport Extender The Transport Extender enables you to access an encrypted path to another distant network, and access applications that are on that network. To use Transport Extender, connect to the web portal by first typing in the browser address bar https://wanipaddress (where wanipaddress is the WAN IP address of the BiGuard SSL VPN appliance). After you successfully connect to the device and successfully log in to the device, the web portal screen appears.
8 REMOTE PORTAL GUIDE 5. After the screen refreshes, click Transport Extender again. 6. You are required to install the MenloLSP.cab. Click Install to install the software. 7. The Transport Extender Setup proceeds. After the installation is complete, the Transport Extender window displays. • • • • Click the Error tab to view a list of session errors. Check Enable Logging to allow the system to log all activity for the session. Click View Log to view a session log.
USING SSL VPN PORTAL ACCESS • • Click Disconnect to disconnect the Transport Extender. Click Close to close the Transport Extender screen. Transport Extender is still active in the status bar. To view the Transport Extender screen again, or disconnect the Transport Extender, right-click the Transport Extender icon and select an option from the menu.
10 REMOTE PORTAL GUIDE Accessing Network Place Network Place enables you to access locations on the network to perform typical file related tasks such as browsing shared files, deleting or adding files, and changing file names. 1. Click the Network Place icon. o 2. The local intranet network opens. Use this screen to perform common file management tasks.
USING SSL VPN PORTAL ACCESS Using FTP The following steps demonstrate how a user will log in to the FTP server from the remote web portal. To access the remote web portal, please connect to the https://wanipaddress (where wanipaddress is the WAN IP address of the BiGuard SSL VPN appliance). A Security Alert message appears. 1. Click Yes to proceed (to accept the certificate sent by the BiGuard system). The log in screen appears.
12 REMOTE PORTAL GUIDE User Name: FTPUser (As previously added in Administrator FTP Configuration section) Domain: Select BiGuard from the drop-down menu. NOTE: User Name and Password are case sensitive. 2. Click Login to enter into the Remote Web Portal page. 3. Click Connect to connect to the TestFTP service. If the user account is the same as the FTP server's account, you will not be asked to input the user name and password, and the FTP session screen appears (see Figure 44).
USING SSL VPN PORTAL ACCESS User name: user Password: Type in the password. (In this example, both user name and password are user) FIGURE 5 FTP session You are logged in to your account in the designated FTP server. Using Telnet/SSH The following steps demonstrate how a user can log in to the Telnet server from the remote web portal. 1. To access the remote web portal, please connect to the https://wanipaddress (where wanipaddress is the WAN IP address of the BiGuard SSL VPN appliance). 2.
14 REMOTE PORTAL GUIDE 3. Type the user name and password (Added in the Administrator Telnet Configuration section) In the illustration above, the User Name is TelnetUser (The User Name and Password are case sensitive) 4. Select BiGuard from the drop-down Domain menu. 5. Click Login to enter the Remote Web Portal page. 6. In the remote portal page, click Connect in the Connect in the applications frame to connect to the TestTelnet service.
USING SSL VPN PORTAL ACCESS 7. Click Yes to accept the certificate. 8. If the name of the site does not match the name of the certificate, the warning message below displays, click Run to continue and enter the service The Telnet screen appears. 9. Type the user name and password in the login screen. In the illustration above, the user name and password are designated as User. The Welcome screen appears.
16 REMOTE PORTAL GUIDE The above screen shows a successful log in on a Telnet server. You are prompted for a username and password to connect to the remote SSH server. Using HTTP and HTTPS The following steps demonstrate how a user will log in to the HTTP(S) server from the remote web portal. 1. To access the remote web portal, please connect to the https://wanipaddress (where wanipaddress is the WAN IP address of the BiGuard SSL VPN appliance). 2.
USING SSL VPN PORTAL ACCESS 4. Type the user name and password that were set under the Administrator HTTP Configuration section, then select the domain. In the illustration below, the user name is HTTPUser and the selected domain from the drop-down menu is Biguard. 5. Click Login to enter into the Remote Web Portal page. 6. Click Connect to connect to the TestHTTP service. The screen below shows a successful access to the remote HTTP(S) server.
18 REMOTE PORTAL GUIDE Using RDP5 The following steps demonstrate how a user will log in to the Terminal Service (RDP5) server from the remote web portal. 1. To access the remote web portal, please connect to the https://wanipaddress (where wanipaddress is the WAN IP address of the BiGuard SSL VPN appliance). 2. A security alert message appears, click Yes when prompted to proceed (accepts the certificate sent by the BiGuard system). The log in screen appears. 3.
USING SSL VPN PORTAL ACCESS 6. Click Connect to connect to the TestRDP5 service. If the user account is the same as the Terminal Service’s account, you will not be asked to input user name and password again. Proceed to step 5. If your user name is different from the Terminal Service’s account, the following message appears. FIGURE 6 Logon message 7. Click OK and the Window’s log on screen appears. 8. Type in the user name and password of the Terminal Service’s account, and click OK to continue.
20 REMOTE PORTAL GUIDE Using VNC The following steps demonstrate how a user can log in to the VNC server from the remote web portal.To access the remote web portal, please connect to the https://wanipaddress (where wanipaddress is the WAN IP address of the BiGuard SSL VPN appliance). A Security Alert message appears. 1. Click Yes to proceed (to accept the certificate sent by the BiGuard system).
USING SSL VPN PORTAL ACCESS After Yes is clicked, the log in screen appears. User Name: VNCUser (As previously added in Administrator VNC Configuration section) Domain: Select BiGuard from the drop-down menu. NOTE: User Name and Password are case sensitive. Click Login to enter into the Remote Web Portal page. 2. Click Connect to connect to the TestVNC service. The following page appears when loading the VNC client program into your computer.
22 REMOTE PORTAL GUIDE FIGURE 7 VNC loading Next, the VNC Authentication log on screen appears. 3. Input the VNC server password, and click OK. The above screen shot represents the remote computer as accessed through the VNC server.
USING SSL VPN PORTAL ACCESS Using CIFS The following steps demonstrate how a user will log in to the FTP server from the remote web portal. 1. To access the remote web portal, please connect to the https://wanipaddress (where wanipaddress is the WAN IP address of the BiGuard SSL VPN appliance). 2. A Security Alert message appears, click Yes when prompted to proceed (to accept the certificate sent by the BiGuard system). The log in screen appears. 3.
24 REMOTE PORTAL GUIDE In the Figure 8 below, you can see a successful connection to the CIFS application.
FAQ SSL Knowledge QUESTION: What browser and version do I need to successfully connect to the BiGuard S Series? ANSWER: It is strongly recommended that the following browsers be used for successful connection: • • • • • Internet Explorer 6.0SP1 (supports Microsoft Internet Explorer 5.01 or newer) Mozilla 1.7.1 and newer Firefox 1.0.6 and newer Opera 8.02 and newer Safari 1.3.
18
