User`s manual

Billion 810VGTX Router
Page | 20
Status: The current status of the 3G card.
Signal Strength: The signal strength bar indicates the current 3G signal strength.
Network Name: The network name that the device is connected to.
Card Name: The name of the 3G card.
Card Firmware: The current firmware of the 3G card.
Current TX Bytes / Packets: The statistics of data transmission in bytes / packets during a call.
Current RX Bytes / Packets: The statistics of data received in bytes / packets during a call.
Total TX Bytes / Packets: The statistics of total data transmission in bytes / packets since system ready.
Total RX Bytes / Packets: The statistics of total data received in bytes / packets since system ready.
ARP Table
This section displays the router ARP (Address Resolution Protocol) Table which shows the mapping of Internet (IP)
addresses to Ethernet (MAC) addresses. This is a quick way of determining the MAC address of the network interface of
your PCs that use the Firewall – MAC Address Filter function. See the Firewall section of this manual for more
information on this feature.
IP Address: Shows a list of IP addresses of devices on your LAN (Local Area Network).
MAC Address: Shows the MAC (Media Access Control) addresses of each device on your LAN.
Interface: Shows the interface name (on the router) that this IP Address connects to.
Static: Static status of the ARP table entry:
“no” for dynamically-generated ARP table entries.
“yes” for static ARP table entries added by the user.