User`s manual

Billion 810VGTX Router
Page | 16


 If you ever forget the login password, please press and hold the reset
button for longer than 6 seconds to restore the factory default settings.
Factory Default Settings
Before configuring your router, you need to know the following default settings.
Web Interface (Username and Password)
Username: admin
Password: admin
A
Attention
The default username and password are “admin” and “admin” respectively.
Device LAN IP settings
IP Address: 10.0.0.2
Subnet Mask: 255.255.255.0
ISP setting in WAN site
PPPoE
DHCP server
DHCP server is enabled.
Start IP Address: 10.0.0.100
IP pool counts: 100
LAN and WAN Port Addresses
The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown in
the tale.
LAN Port WAN Port
IP address http://10.0.0.2
The PPPoE function is enabled to
automatically get the WAN port
configuration from the ISP, but you
have to set the username and
password first.
Subnet Mask 255.255.255.0
DHCP server function Enabled
IP addresses for distribution
to PCs
100 IP addresses continuing from
10.0.0.100 through 10.0.0.199