User manual

TELKOM VPN-Lite 2.3 ver.080311 Page 9
On the Telkom VPN-Lite setup site you would have received a LAN Subnet address that could look
like this 10.0.2.0/24. Your router’s LAN IP would then be 10.0.2.2 and your Subnet Mask will be
255.255.255.0. Change the IP Address and the Subnet Mask on the screen and press the Apply
button.
Your routers IP address is now changed to the new IP entered in the previous step. To ensure that
your PC can still communicate with your Billion router on its new LAN IP address, you should release
and renew your PC’s IP address. In XP, Vista or Windows 7 press the Start button. Select All
Programs\Accessories\Command Prompt. A Command prompt screen will appear
Type the following and press enter: ipconfig /release
You should now wait for your IP to be released.
Then type: ipconfig /renew.
Your PC’s IP will now be renewed and within the new range to enable you to connect to your Billion
router’s new LAN IP address. You can now close the Command Prompt screen.
To reconnect to your router select the link with the new IP address displayed in your Internet Browser.
Your Internet Browser will now reconnect to your Billion router.
Now in the bottom right corner press the SAVE CONFIG button. The following screen will appear.
Press the Apply button. Your settings will now be saved and you can start to use your VPN-Lite
service.