User manual

TELKOM VPN-Lite 2.3 ver.080311 Page 8
You will require you VPN-Lite site username and password that you retrieved from the Telkom VPN-
Lite setup site. You can change the Service Name field to VPNLite, Disable the Nat setting and enter
your VPN-Lite site Username and Password. Ensure that the Enable tick-box is ticked and press
Apply to save the settings.
You will now see your new WAN Connection on the default landing page.
In the menu in the left first click Advances and then select Configuration – Advanced – Static Route
the following screen will appear in the right.
Select the Delete radio button next to the 0.0.0.0 default router automatically created by the router and
click on Edit/Delete. This will remove the default route.
You need to setup 3 Static Routes for your VPN-Lite service. You should supply the Destination,
Netmask and Interface. The first Destination is 10.0.0.0: the Netmask should be 255.0.0.0 and for
interface select MPPP-0. Select apply to save the first Static Route.
Press create to add the following 2 Static Route’s.
Destination
Netmask
Interface
172.16.0.0
255.240.0.0
ppp-0
192.168.0.0
255.255.0.0
ppp-0
Configure your router IP address
In the menu on the left firstly click on Advance then select Configuration – LAN – Ethernet. The
following screen will appear on the right.