User manual

Billion800VGT
TLK/800VGT-v2.5-080523

15


UsingtheManagementUtility:


1. Run the Utility software by launching it from the “Start>All programs>Billion
800VGT”menu.Seefigurebelow.



2. TheBillion800VGTmanagementutilitywilllaunchandimmediatelypromptyoufora
routerIPaddressandpassword(seefigurebelow).



Thisinformationisusedtoaccesstherouter.IfyouhavenotintentionallyalteredtheIP
addressoftherouter,itwillstillbe10.0.0.2,whichisthefactorydefault.

The password is the administration password that you might have changed
during the final step of the Easy Setup Wizard. (Please refer to step 14 on
page13).Ifyouhavenotchangeditintentionally,itshouldstillbe“admin”.

Onceyouhaveentered/confirmedthecorrectIPaddressandpassword,click
the “OK” button. The utility will now attempttoset up communications to the
Billion800VGTusingtheinformationprovided.

3. Onsuccessfullycontactingtherouter, the management utility main menu will
appear(seefigurebelow).










