User manual
QuickStartGuide
TLK/800VGT-v2.5-080523
14
Thefollowingsectioninthequickstartguideexaminesthe
managementutilityandhowitcanbeusedtosetupand
managethemoreadvancedfeatureslikeVoIPandwireless.
TheutilityalsoenablesyoutomanageyourISPand
administrationaccounts.
TheutilityisalsousedtodiagnoseyourcurrentBillion800VGT
configurationandassistintroubleshootingwhenproblems
occur.Thisdiagnostictestwillalsobethestartingpointinthe
faultfindingprocesswhenyoulogacallwithSizweBroadband
supportservices.
Thefollowingstepsareoptional.Ifyoudonotwanttosetup
advancedfeatures,donotproceedtothefollowingsteps.
You can skip this step by clicking on the “Skip” button, however this is not
recommended.Ifyouclickskip,awindowwillpopupinformingyouthatitisnot
recommended to leave these as their default values. If you would like to
change the security settings click on the “Yes” button. To proceed without
changingthevaluesclickonthe“No”button,thiswillthensaveallthedetailsto
therouterandrestarttherouter.
15.Afteralltheinformationhasbeensaved,youwillbenotifiedthatthewizardis
now completed and that the router will now restart. The restart will take
approximately 1 to 2 minutes, where after you will be able to browse the
internet.Clickonthe“OK”buttontocompletethewizard.
It is strongly recommended that you change the WPA
shared-key for the wireless network to a user-defined
value. This key must be no less than eight (8)
alphanumericcharacters.
ItisrecommendedthattheWirelessAccesspointnameis
alsochangedtoanewname.Thisisthenamethatwillbe
displayed for your wireless network when you scan for
networksinrange.
You should change the admin password on your router,
thiswillensurethatnobodycangainunauthorisedaccess
toyourouter.
Pleasememorizeorkeepthispasswordinasafeplace,as
you’ll be prompted for it when using the management
utility.
Warning