BIPAC-7000 ADSL USB Modem Quick Start Guide
Billion BIPAC-7000 ADSL USB Modem Package Contents • One Billion BIPAC-7000 ADSL USB Modem • One installation CD with drivers and online manual • One RJ-11 ADSL telephone cable • One USB cable • This Quick Start Guide The Front Panel LEDs LED Meaning USB When this LED is lit, it indicates that the USB port is connected to the PC and working properly. DATA When this LED is flashing constantly, it indicates the BIPAC-7000 is transmitting/receiving data.
Quick Start Guide PPPoE VPI/VCI, VC-based/LLC-based multiplexing, Username, Password, Service Name, and Domain Name System (DNS) IP address (it can be automatically assigned from ISP or be set fixed). PPPoA VPI/VCI, VC-based/LLC-based multiplexing, Username, Password, and Domain Name System (DNS) IP address (it can be automatically assigned from ISP or be set fixed).
Billion BIPAC-7000 ADSL USB Modem For Windows XP: 1. Start Windows. After the opening banner, Windows will tell you that the new device has been detected. Select “Install from a list or specific location” and click “Next >”. 2. Insert the installation CD into the CD-ROM drive and select “Include this location in the search”. Click “Browse” to specify the driver directory such as F:\Driver\LAN for installing Billion ADSL USB LAN Adapter or F:\Driver\WAN for installing Billion ADSL USB WAN Adapter.
Quick Start Guide 3. When windows titled “Hardware Installation” or Installation” appears, click “Continue Anyway” to go on. 4. “Software Then, click “Finish”. 5. After Billion ADSL USB Modem driver is successfully installed, the Status Task Bar will appear on the System Tray.
Billion BIPAC-7000 ADSL USB Modem For Windows 2000: 1. Start Windows. After the opening banner, Windows will show the new device has been detected. Click “Next>”. 2. Select “Search for a suitable driver for my device”. Click “Next>”. Then, insert the installation CD into the CD-ROM drive. In next window, check “Specify a location” and click “Next>” as shown on below. 3. Click “Browse..”.
Quick Start Guide 4. When windows titled “Digital Signature Not Found” appears, click “Yes” to continue the installation. 5. Press “Finish”. 6. After Billion ADSL USB Modem’s driver is successfully installed, the Status Task Bar will appear on the System Tray.
Billion BIPAC-7000 ADSL USB Modem For Windows Me: 1. Start Windows. After the opening banner, Windows will tell you that the new device has been detected. Select “Specify the location of the driver” and click “Next >”. 2. Insert the installation CD into the CD-ROM drive and check “Specify a location”. Click “Browse…” to specify the driver directory such as F:\Driver\LAN for installing Billion ADSL USB LAN Adapter or F:\Driver\WAN for installing Billion ADSL USB WAN Adapter.
Quick Start Guide 3. Continuing through the Wizard, Windows will start copying files to your system. Then, click “Finish”. 4. After Billion ADSL USB Modem driver is successfully installed, the Status Task Bar will appear on the System Tray.
Billion BIPAC-7000 ADSL USB Modem For Windows 98: 1. Start Windows. After the opening banner, Windows will tell you that the new device has been detected. You will then see the following screen. Click “Next >”. 2. In the next window, select “Search for the best driver for your device” and click “Next >”. 3. Insert the installation CD into the CD-ROM drive and check “Specify a location”.
Quick Start Guide 4. Continuing through the Wizard, click the “Next >” button. Windows will start copying files to your system. 5. Then, click “Finish”.
Billion BIPAC-7000 ADSL USB Modem 6. When Billion ADSL USB Modem driver is successfully installed, the Status Task Bar will appear on the System Tray. For Mac OS 9: If you connect the ADSL Modem/Router through USB port, for the first time the USB cable is connected to the PC, the host PC OS will automatically detect the device. Follow the steps to install the USB driver. 1. When PC tells you that the new device has been detected, insert the installation CD into the CD-ROM drive.
Quick Start Guide 3. Click “Restart” to end the installation. For Mac OS X: 1. Insert the installation CD into the CD-ROM drive, click the driver installer. 2. Input the user name and password of your Mac system. 3. Click “Continue”.
Billion BIPAC-7000 ADSL USB Modem 4. Select a destination to install the driver, choose Mac X. 5. Click “Continue”. 6. Click “Continue Installation” to end the installation.
Quick Start Guide For Linux Redhat 7.1/7.2/8.0/9.0: 1. Install the driver (Redhat 7.1) #rpm –i BIPAC-7000-REDHAT-7.1.i386.rpm (Redhat 7.2) #rpm –i BIPAC-7000-REDHAT-7.2.i386.rpm (Redhat 8.0) #rpm –i BIPAC-7000-REDHAT-8.0.i386.rpm. (Redhat 9.0) #rpm –i BIPAC-7000- REDHAT-9.0.i386.rpm. 2. Launch the driver #cd /usr/local/e2 #insmod e2.o #ifconfig hsb0 up(Note: run this command after the READY LED blinks) #dhcpcd hsb0 (Note: run this command after the READY LED blinks) 3.
Billion BIPAC-7000 ADSL USB Modem Configuring Billion ADSL USB Modem (For Windows) 1. Click Billion ADSL USB Modem icon in the Control Panel or ADSL Configuration icon on the desktop. The status of ADSL connection will be displayed. 2. Press [Alt]+[P] on keyboard, the following widow will appear. 3. Select the Protocol Setup tag, please set the value of “VPI”, “VCI” and “Encapsulation Mode”. Then, click “OK”.
Quick Start Guide (For Mac OS 9/X and Linux Redhat 7.1/7.2) The ADSL USB Modem uses “Emulate USB port to Ethernet” technology to emulate USB port to Ethernet port for Mac and Linux system. The ADSL USB Modem can be configured with your web browser. The default IP address of the ADSL USB Modem is 192.168.1.254 and subnet mask is 255.255.255.0. To configure this device, you must have IE 5.0 / Netscape 4.5 or above installed. 1. Open web browser and type http://192.168.1.254 in the browser’s address box.
Billion BIPAC-7000 ADSL USB Modem Open your Web browser to begin surfing the Internet. For more detailed instructions on configuring and using the product, please refer to the on-line manual.
Quick Start Guide For Billion ADSL USB LAN Adapter: This section is described based on Windows 2000 / XP. For other Operating Systems such as Windows 98 / Me, please refer to the on-line manual for more detailed instructions. 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2. Right–click on Local Area Connection that is using the Billion ADSL USB LAN Adapter and then click “Properties”. 3. Select Internet Protocol (TCP/IP).
Billion BIPAC-7000 ADSL USB Modem Select Use the following DNS server addresses, and then enter the provided DNS server IP address. For Billion ADSL USB WAN Adapter: 1. Click ADSL Easy Dialup icon on the desktop. The following window should appear. Enter the “Username” and “Password” provided by your ISP. Let the Phone number field be blank. 2.
Quick Start Guide Product Support and Contact Information Most problems can be solved by referring to the Troubleshooting section in the User’s Manual. If you cannot resolve the problem with the Troubleshooting chapter, please contact the dealer where you purchased this product. Contact Billion AUSTRALIA http://www.billion.com.au Hotline: 1300 139 159, 7 days a week. ©2003 Billion Electric Co, PC Range P/L. All Rights Reserved. WORLDWIDE http://www.billion.
