User manual

Telkom ADSL 5102G
3
The Rear Ports
Figure 2
Port Meaning
1
Power Switch
Power ON/OFF switch
2
PWR
Connect the supplied power adapter to this socket.
3 RESET
The moment the device is powered on, press it to reset the
device or restore to factory default settings.
0-3 seconds: reset the device
6 seconds above: restore to factory default settings (this is
used when you can not login to the router, e.g. forgot the
password)
4
LAN
1X — 4X
(RJ -45
connector)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
four LAN ports when connecting to a PC or an office/home
network of 10Mbps o
r 100Mbps. You may use a straight or a
crossover cable.
5
LINE
Connect the surge protected (“out”) RJ-11 plug of the integrated
surge and power unit into this socket.
1
2
2
3
4
5