Instruction manual

2.4 The Rear Ports
Telkom 5102G
2
3
4
5
1
Port Meaning
1
Power
Switch
Power ON/OFF switch
2
PWR
Connect the supplied power adapter to this socket.
3 RESET
The moment the device is powered on, press it to reset the
device or restore to factory default settings.
0-3 seconds: reset the device
6 seconds above: restore to factory default settings (this is
used when you can not login to the router, e.g. forgot the
password)
4
LAN
1X-4X
(RJ-45
connector)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
four LAN ports when connecting to a PC or an office/home
network of 10Mbps or 100Mbps. You may use a straight or a
crossover cable.
5
LINE
Connect the surge protected (“out”) RJ-11 plug of the
integrated surge and power unit into this socket.
2.5 Cabling
One of the most common causes of problems is bad cabling or ADSL line(s). Make sure that
all connected devices are turned on. On the front of the product is a bank of LEDs. Verify that
8