Data Sheet

B-3000 Sparkling Specification Sheet
Specifications and guide to standard model selection
Product
Number
Description
Suggested no.
of persons
Delivery cups
/ hour
Power
required
(amps)
Unit
Height
(mm)
Unit
Width
(mm)
Unit
Depth
(mm)
913100
DCH
B
-3000 Sparkling
20
100
10
410
255
420
Electrical installation requirements
The B-3000 Sparkling requires a standard 10
amp AU power outlet. It is supplied with a 1
metre flex cord and plug.
Water supply
A single 15mm (1/2”) BSP stop-tap with a
male thread + position. Water supply must
be microbiologically safe to drink, with a
minimum dynamic water pressure of
250kPa to a maximum of 1000kPa.
CO
2
Gas Cylinder
The CO
2
gas cylinder supplied must be
secured in a suitable location. Each cylinder
contains 1100g of CO
2
and should be
installed in a well ventilated area. Each
cylinder will provide between 200-350L of
sparkling water depending on the unit
settings. The MSDS is available on
www.billi.com.au
for a complete list of
specifications and warnings. Replacement
gas cylinders are available from Billi.
Warranty
The Sparkling range is covered by a
comprehensive 2 year warranty on all parts
and labour.
Technical Advice
Contact Billi Pty Ltd on 1800 812 321
Refer to installation guide for full details
including ventilation requirements.
Filtration
Billi have partnered with globally
recognised brand Pentair Everpure to
create the most technologically advanced
filtration for instant boiling and chilled
filtered water systems. It removes
sediment and chemicals, allows the flow
of minerals through without scale build up
and suppresses harmful bacteria in the
water. Due to the unique Fibredyne™
technology, our filters have a longer life,
higher flow rate and lower pressure drop,
leaving you with healthy fresh water. All
Billi cartridges are certified by NSF
International.
Filter changes are made simple by our
swing-change system and replacement
cartridges are available online at
www.billi.com.au
. Optional sub micron
filters are available.
Certifications
Every Billi drinking water appliance is
manufactured under a certified quality
control system. Billi Sparkling models
have been tested and comply with all
required standards including: Watermark
License Number 022690; Tested to;
ATS5200.105 and AS/NZS4020; AS1428
Accessibility Design Requirements;
ISO9001 Certificate Number QEC 11627.
Preferred installation layout
Dual Levered Slimline tap dimensions
Billi Pty Ltd
42 Lucknow Crescent, Thomastown
Victoria, 3074 Australia
Telephone + 613 9469 0400
Facsimile + 613 9469 0499
Website www.billi.com.au
Designed and manufactured in Australia
As Billi Pty Ltd has a policy of continual
improvement, all details are subject to change
without notice.
All goods sold are subject to our standard
terms and conditions. 0217