Instructions / Assembly

Table Of Contents

HUB REAR

HUB FRONT

HANGER ROD

SHORT PIN (10)

CROSS TUBE-1

CROSS TUBE-2

CROSS TUBE SET (6)

SLIDER (6)

WIRE GRID (4)

LEG TUBES (2)

BASE

LOWER

VERTICAL TUBE

UPPER

VERTICAL TUBE

BIKE TREE

HUB ASSEMBLY (4)

BIKE TREE ULTRA MAX HD

ASSEMBLY INSTRUCTIONS

MAIN BIKE TREE

UNIT

PAGE 1
HUB REAR BIKE TREE ULTRA MAX HD ASSEMBLY INSTRUCTIONS HUB FRONT HANGER ROD BIKE TREE HUB ASSEMBLY (4) UPPER VERTICAL TUBE SHORT PIN (10) MAIN BIKE TREE UNIT LOWER VERTICAL TUBE SLIDER (6) BASE WIRE GRID (4) CROSS TUBE SET (6) LEG TUBES (2) CROSS TUBE-2 CROSS TUBE-1
PAGE 2
****THIS ASSEMBLY MIGHT REQUIRE TWO PERSONS. PLEASE ASSEMBLE WITH CARE. SAFETY FIRST!! 1. Determine location of the Bike Tree Ultra Max HD. Allow sufficient room to fit all items to be stored. You will need approximately 5 feet of wall space. More space will be needed if bicycles or longer objects are stored. 2. Remove all packaging from all cartons. 3. Bike Tree Hub Aseembly (4 - if using): a. Disassemble the plastic hub. b.