User manual

Fixed Wireless/Wired IP Camera

1. Introduction

The IP Cam/w is designed with the “user-friendly” idea deep in mind. The user

can

install the IP Cam/w easily on his/her home network and then access the IP

Camera

anywhere in the world through the accompanied video management software

CamView program without setting some complicated DNS name or changing the

router’s settings. It’s just a plug & play action.

For indoor surveillance and remote monitoring, the IP Cam/w provides the best

image quality in its class, and excellent performance. The IP Cam/w also provides the

best bandwidth efficiency, it offers 640x480 resolution, 30 fps frame rate, real MPEG4

image compression ability. The built-in microphone enables remote users to not only

view, but also listen for additional monitoring options.

Of course, with the built-in Web server, the IP Cameras can also be managed

from a standard web browser on a Windows computer.

The IP Cam(w) provides both wireless IEEE 802.11 b/g and wired Ethernet

network interfaces for flexible installation. It supports the WEP and WPA (Wi-Fi

Protected Access) security modes to provide the best security for wireless networks. (IP

Cam model only support wired Ethernet interface)

The IP Cam/w provides motion detection function. Users can easily setup this

function and receive the notification with the snapshot images through email and/or ftp

when some motion events are detected.

The IP Cam/w is ideal for securing small businesses, home offices and

residences over a local area network and/or the Internet.

The differences

It’s very easy to see the video of the IP Cam/w, you only need to key in the

ID/Password of the IP CAM anywhere in the world, you do not need to remember the IP

address or domain name or DDNS name or port number. And you do not need to modify

the settings (like port mapping, fixed IP, DDNS, virtual server) of the NAT/router devices, it’s

just a plug & play usage.

So, the differences are the followings:

♦ Public IP address needed ? No

♦ Dynamic DNS needed ? No

♦ Port mapping in router? No

♦ Virtual server in router ? No

♦ UPnP support in router ? No

♦ What’s needed ? ID and Password