User manual

Fixed Wireless/Wired IP Camera
4.2. Specifications
Models
Power
Processors
Network interface
Wireless interface
Image sensor
Light sensitivity
Lens
Buttons
Indicators
Video compression
Resolutions
Frame rate
Video streaming
Image settings
Audio
IP Cam/w
DC 5V, 1A
RISC CPU, hardware video processing and compression.
Ethernet 10BaseT/100BaseTX, Auto-MDIX, RJ-45 IEEE 802.11g
6 - 54 Mbps
IEEE 802.11b 1 - 11 Mbps
Transmit power: 14.5dBm typically @ 802.11g
17.5dBm typically @ 802.11b
Receiver sensitivity: 54Mbps: Typical -73dBm @ 10% PER
11Mbps: Typical -86dBm @ 10% PER
Modes: Infrastructure and ad-hoc
Antenna gain: 1.8 dBi
RGB VGA 1/4 inch CMOS
Automatic exposure control, automatic white balance,
automatic gain control, automatic brightness control.
1.9 Lux
3.2 mm, F2.0, viewing angle: 61°, fixed iris, focus range: 40 cm
to infinity
One reset button, to factory default settings
One LED for internet connection status indication
One LED for Ethernet connection indication
MPEG-4 Part 2 (ISO/IEC 14496-2) with motion detection,
profiles: Simple Profile, level 0-3
160x120, 320x240, 640x480
Up to 30 fps in all resolutions
MPEG-4
Controllable frame rate and bandwidth
Resolution: VGA(640x480), QVGA(320x240),
QQVGA(160x120)
Bandwidth : 64k, 128k, 256k, 512k, 768k, 1M, 1.2M, 1.5M
bps
Frame rate : 5, 10, 15, 20, 25, 30 fps
Built-in microphone for audio monitoring
Audio compression:
MPEG2 audio, AMR-NB for 3GPP/ISMA
35