User manual

Fixed Wireless/Wired IP Camera

3.14. Safe Mode

If by some abnormal operation, for example, powered off during the critical point of

the upgrade procedure, the IP CAM will enter into the safe mode. In this mode, you will

see the following “Safe mode” page when login into this IP CAM. Please do the

upgrade operation immediately to recover the system. On this safe mode, the IP CAM

can not display the video on the CamView software, but you can still find this IP CAM on

the “Auto search” list.

The steps to recover from “safe mode” are the followings :

1. Use CamView to locate the IP CAM by clicking the “Auto Search” item on the

CamView software.

2. Login into the web configuration page of the IP CAM.

3. Upgrade the firmware from the “Upgrade” page.

Figure 3-21: Safe mode information page