User manual

Fixed Wireless/Wired IP Camera

3.12. Upgrade

If there is some new firmware available from the supplier of this IP CAM, you can

upgrade the firmware on this page. Please ask for the correct information about FTP

server, username/password account and firmware filename from your supplier, and

then do this upgrade. A status message about the percentage done in the upgrade

procedure is displayed. Please be noticed that during the upgrade procedure, do not

power off the IP CAM, otherwise, the IP CAM could probably enter into the safe

mode(section 3.14). After the upgrade procedure is finished, the system will restart

automatically.

During this upgrade procedure, do not try to modify other settings or view the

video.

Figure 3-17: Firmware upgrade settings page

Figure 3-18: Firmware upgrade status page