Product Manual

Warning
Be sure you read the installation instructions and follow them
completely. Make sure your RopsRackPack is completely secure to your
ROPS before you attach any tools to it.
Please reference your vehicles operators manual for complete operational details and take the necessary
precautions, as with any attachment, to avoid machinery instability issues.
To avoid tip over and stability issues, please operate with consideration of weight and height of the load carried
and make sure that heavy loads are carried as low as possible.
When attaching your tools to the D rings on the RopsRackPack be sure you fasten them securely to the rack so
they do not move around or come loose during transit.
If the items you attach stick outside of the wheelbase of your machine please be aware of your surrounding areas
so you do not come in contact with them while driving your vehicle. The area you drive in must be clear. Do not
overload your RopsRackPack. 20LBS per side and no more than 50LBS total.
Always balance your load.
We do not recommend you using your Rops
RackPack in the down position. We recomend that the ROPS be in
the upright position. The downward install position is only recommend for storage use when you store your
vehicle in your garage or barn with low headroom. This will allow you to store your tools on your vehicle when
not in use.
Please visit our website for the most up to date
information and latest detail
on all Bigtoolrack products.
https://www.bigtoolrack.com
Thank you for your continued support
and business!