Product Manual

ManualsBrandsBigToolRack ManualsExterior Tractor Cab AccessoriesBTR Big Tool Rack ROPS Rack Pack - Large, 7-Pc. Set

Table Of Contents

Blank Page

Place the large anchor sleeve on top of the

frame with the “BIGTOOLRACK” logo facing

the rear

Wrap and secure the large anchor sleeve with velcro

velcro

Pull the large anchor sleeve webbing through bottom

slot of the buckle on the side sleeve, and cinch

through top slot

Repeat steps 3-5 on the opposite side

Wrap around and cinch the two horizontal straps on

side sleeve.

Installing the RopsRackPack™ System

Wrap the side sleeve around the side of the frame

and secure it with velcro Make sure the “BTR” logo

is on the outside, and metal loops face the rear.

patent pending

Web https://www.bigtoolrack.com

info@bigtoolrack.com

1-844-BTR-RACK

Optional:

ut and seal all straps to desired length.

Summary of content (4 pages)

PAGE 1
Installing the RopsRackPack™ System 1. Place the large anchor sleeve on top of the frame with the “BIGTOOLRACK” logo facing the rear 2. Wrap and secure the large anchor sleeve with velcro velcro 3. Wrap the side sleeve around the side of the frame and secure it with velcro Make sure the “BTR” logo is on the outside, and metal loops face the rear. 4. Pull the large anchor sleeve webbing through bottom slot of the buckle on the side sleeve, and cinch through top slot 5.
PAGE 2
Installing RopsRackPack™ System When Frame is Folded Down 1. Capture the strap loop with the side sleeve and secure the velcro to hold in place strap loop hinge lock hole (x2) horizontal strap 2. Keep the strap loop loose, cinch the two horizontal straps on side sleeve Take the loose end of strap loop and thread through the hinge lock holes (x2) on hinge plates Thread the end of strap loop through the side sleeve buckle horizontal strap 3.
PAGE 3
Installing RopsRackPack™ OPTIONAL System Extention Kit 1. Secure the additional side sleeves with velcro and connect to the upper side sleeve Thread the connecting strap through the bottom slot then through the top slot of the lower side sleeve buckle Thread the end of connecting strap through the upper side sleeve buckle connecting strap 2. Cinch connecting strap tight Tuck the buckle end of connecting strap away Optional: Cut and seal the connecting strap to desired length 3.
PAGE 4
Warning Be sure you read the installation instructions and follow them completely. Make sure your RopsRackPack is completely secure to your ROPS before you attach any tools to it. Please reference your vehicles operators manual for complete operational details and take the necessary precautions, as with any attachment, to avoid machinery instability issues.