User manual

FOLDING BIKE
15
HOW TO FOld
The following steps need to be taken in order to fold the Bigfish folding bike properly. It can be done in any sequence.
Stand on the left hand side of the bike on a level and flat surface.
TIP: Before starting to fold the Bigfish folding bike, position the pedals horizontal to the ground, with the left pedal to the front.
rear WHeel
Raise the bike stand to its riding position. A: Lift the seat tube slightly, then pull the round ‘Pull Release’ stopper out with your right hand. This
allows the bike to sit on the ground on its coaster wheels. Release the round ‘Pull Release’ stopper. B: Then, using the bike stand, lift the rear
wheel towards the seat tube to fasten the rear wheel in place. The round stopper MUST jump back to its original position.
Safe to handle: Red square on the round ‘Pull Release’ stopper is completely hidden.
red square on the round
‘Pull Release’ stopper
completely hidden
1
a B
2
red square