User manual

FOLDING BIKE
13
HOW TO UnFOld
rear WHeel
A: With your left hand pull the rear wheel slightly towards the seat tube using the back of the mudguard and then pull out the round ‘Pull
Release’ stopper with your right hand to loosen the rear wheel. Release the round ‘Pull Release’ stopper. B: Then pull the bike’s frame by the
seat tube up into the unfolded position, so that it clicks in place. The round ‘Pull Release’ stopper MUST jump out to its original position.
Safe to ride: Red square on the round ‘Pull Release’ stopper is completely hidden.
If you can see even the smallest part of the red square on the round ‘Pull Release’ stopper when the bike is folded/unfolded, the rear part of the bike is NOT
folded/unfolded correctly. Try again, so that the round ‘Pull Release’ stopper returns back into its original position and no red mark is visible. If the problem
persist do NOT ride the bike. Take your bike to your local dealer to have it serviced or contact us at info@bigfi shbike.com.
When unfolding the rear wheel do NOT put your fi ngers in the dangerous area below the round “Pull Release” stopper! Placing your fi ngers or other body
parts in the dangerous area below the round “Pull Release” stopper can result in serious injury.
1
2
3
a
B
red square
red square on the round
‘Pull Release’ stopper
completely hidden